M-HC225

Data:

 

Versions: 13 different intensification factors

PIN: 20 – 207 bar

PH: 800 bar maximum

Q: Up to 40 l/min

PRETURN: As low as possible (return pressure to tank)

POUTLET: PH = (PIN – PRETURN) x intensification factor

Weight: 5.7 kg.

Model versions:

A model = no dump valve
B model = with dump valve

Material certificate 3.1 on request

Description

The M-HC225 is a compact field unit weighing only 5.7 kg. It is ideal for use in a variety of applications where building and maintaining high pressure is required.

The M-HC225 incorporates a Pressure Reducing Valve (PRV) to control inlet pressure to the booster section, and an optional orifice to reduce inlet flow to the maximum allowed for the intensification ratio selected.
The integrated Pressure Reducing Valve (PRV) protects both booster and high-pressure tool against too high pressure. It secures a stable high pressure regardless of changes in the tank line pressure.

The M-HC225 also incorporates a counterbalance valve, which allows fast-forward movement of a cylinder by directing the full inlet flow to pass directly through the booster section until the set pressure has been reached. Then the counterbalance valve opens, and the booster starts oscillating.

The M-HC225 booster will automatically stall when the high-pressure side H is reached. The booster will continuously compensate for oil consumption to maintain the high pressure. Adjustment of the outlet pressure is carried out by varying the supplied pressure.

An optional orifice can be mounted in the booster to reduce inlet flow to the maximum allowed for the intensification ratio selected.

Functions

The basic operation is illustrated in the function diagram. Oil is fed through the directional valve (in the customer system) to the IN port, flowing freely through the internal check valves to the high-pressure side H.

When pump pressure is reached on the high-pressure side H, the internal check valves will close. The end pressure will be achieved by the oscillating pump unit OP. The unit will automatically stall when the high-pressure side H is reached. If a pressure drop on the high-pressure side exists due to consumption or leakage, the OP valve will automatically operate to maintain the end pressure.

Function diagram

107-02

Dimensions

Dimension drawing M-HC225-01

Connection types

ConnectionP / T / ZH
1M14 x 1.5 with 24° cone1/4" BSPP

Fluids and materials

Additional information is available on the website under Products → General specifications.

Ordering an M-HC225

Ordering example of an M-HC225 with i = 4.0, DV incorporated and BSPP connections:

M-HC225 – 4.0 – B – 1

R

Model

  • M-HC225
R

Intensification, i

  • Select factor
  • See table below
R

Model version

  • Model version
  • A = without DV
  • B = with DV
R

Connections

  • Select thread
  • 1 = BSPP

Selection of intensification factor

ModelIntensification, iModel versionConnection
M-HC2251.2A or B1
M-HC2251.5A or B1
M-HC2252.0A or B1
M-HC2252.2A or B1
M-HC2252.5A or B1
M-HC2252.8A or B1
M-HC2253.2A or B1
M-HC2254.0A or B1
M-HC2255.0A or B1
M-HC2256.6A or B1
M-HC2259.0A or B1
M-HC22513.0A or B1
M-HC22520.0A or B1

Max. tightening torque

P / T / ZH
M14 x 1.51/4" BSPP
with steel washer4.0 da/Nm4.0 da/Nm
with cutting edge4.0 da/Nm4.0 da/Nm